Intersystems
64K Dynamic RAM Card.
This was a later Intersystems EPROM
Board. It is possibly one of the best S-100 EPROM baords made. It was
exrtemly powerful with all the requirments of the IEEE-696 standard
implemented. The only other comparaiable EPROM board would be the DRC
128K ROM/RAM Board.
The Ithaca InterSystems EPROM Memory board was a versatile
microcomputer memory module designed for 8-bit or 16-bit S-100 bus systems. It
provided up to 64 kbytes, or as little as 1 kbyte, of non-volatile EPROM storage
in any S-10O system. There were two assembled versions of the EPROM Memory
board.
The EP64 accommodated any of the following EPROMs: 2508,
2758, 2516, 2716, 2532, and 2732.
The EP16 accepted the old 2708 EPROMs and with hardware
modification by the user, T.I. 2716 EPROMs.
Modification of the EP 16 board is described in section 3.0
of the manual.
Board Features include the following:-
16 EPROM capacity; arranged as two banks of eight EPROMs.
Each bank of the EP64 is independently configurable to accept
either :-
2508, 2516,
2716, 2532, 2732, or 2758 EPROMs or compatible ROMs.
Each bank was independently addressable to any bank-sized
boundary in the 16 Mbyte memory address space.
The phantom facility allowed the board to overlap
system memory.
EPROMs may be accessed in pairs for 16-bit data transfer.
EPROMs may be disabled in
pairs.
From 0 to 4 wait states are jumper selectable,
allowing operation in 6 MHz systems.
The EP64 board may be configured for either fast access
time or low power consumption.
The manual for this board (with schematic) can be obtained
here.
Other InterSystems S-100 Boards
64K Dynamic RAM
8K RAM
EPROM
IA-Display
FDC
IO-Card
Z80-Series-II
Z80
FPB
256K Dynamic RAM
16-64K EPROM
HDA
Z80-Series_III
6-SIO
EPROM Emulator
RTC Board
This page was last modified
on 01/08/2011